CRYORIG M9 Plus Dual Fan CPU Air Cooler, Compact Dual Fan Tower
The Ultra-Compact Dual Fan Tower Cooler.
Direct Air Tunnel Effect, Aligned System Airflow
By adding one additional fan the full fan system aligns with your system fan, to concentrate and expel exhaust heat.
This increases the overall efficiency of the whole system airflow.
Increased Air Exhaust Speed
Higher Cooling Efficiency
The CRYORIG M9i/M9a features CRYORIG proprietary Jet Fin Acceleration System™. By creating a structure of alternated fin stacks, the M9i/M9a has a wider air intake area and higher fin density air exhaust area to squeeze out air, heated air exits the system faster.
True Copper Base Plate
Increased Cooling Efficiency
CRYORIG’s M9i/M9a while being an entry level product, comes with a True Copper Base Plate. Copper base plates can effectively spread heat to all heatpipes and allows for increased heat contact area.
In comparison on a heatsink without a True Copper Base Plate, the heat source from the CPU die will not efficiently reach the outer heatpipes and the aluminum material holding heatpipes also provide lackluster contact and heat conduction with the heatpipes. Together with the highly heat conductive C1100 Pure Copper, further increasing heat conduction efficiency of the whole cooler.
CRYORIG’s Smallest Tower to Date
Minimal Height, Maximum Performance
With a total height of 124.6mm, the CRYORIG M9i/M9a is the smallest CRYORIG Tower cooler. Featuring the same materials and cooling technology found
on all CRYORIG tower coolers, there are no compromises or downgrades to quality and performance. It’s the perfect entry product to PC Building, Enthusiast Grade Cooling, and Overclocking.
Focusing on providing the widest range of compatibility, the M9i/M9a’s small size moves the heatsink away from the RAM and inside the *CPU Keep Out
Zone, offering optimal compatibility for RAM with tall heat spreaders on both intel™ 115X and AMD platforms.
The CPU Keep Out Zone is a design guideline set by both intel™ and AMD. It is set around the CPU, and dictates no components over a certain height
can be placed there.
Dimension ( with fan ) L98.4 mm x W102 mm x H124.6 mm
Weight ( with fan ) 505 g
Weight ( without fan ) 345 g
Heat pipes 6mm heatpipe x 3 units
Fin T = 0.4 mm ; Gap = 2.6 mm
Fin Pcs 40 pcs
Copper Base C1100 Pure copper nickel plated
RAM Height Limit Limitless
TDP 130 W
Dimension L92 mm x W92 mm x H25.4 mm
Weight 80 g
Rated Speed 600 ~ 2200 RPM ±10 %
Noise Level 26.4 dBA
Air Flow 48.4 CFM
Air Pressure 3.1 mmH2O
Ampere 0.11 A
Only logged in customers who have purchased this product may leave a review.