CRYORIG M9I CPU Air Cooler, Intel

CRYORIG M9i

Increased Air Exhaust Speed

Higher Cooling Efficiency

The CRYORIG M9i/M9a features CRYORIG proprietary Jet Fin Acceleration System™. By creating a structure of alternated fin stacks, the M9i/M9a has a wider air intake area and higher fin density air exhaust area to squeeze out air, heated air exits the system faster.

True Copper Base Plate

Increased Cooling Efficiency

CRYORIG’s M9i/M9a while being an entry-level product, comes with a True Copper Base Plate. Copper base plates can effectively spread heat to all heat pipes and allows for increased heat contact area. In comparison on a heatsink without a True Copper Base Plate, the heat source from the CPU die will not efficiently reach the outer heat pipes and the aluminum material holding heat pipes also provide lackluster contact and heat conduction with the heat pipes. Together with the highly heat conductive C1100 Pure Copper, further increasing heat conduction efficiency of the whole cooler.

CRYORIG’s Smallest Tower to Date

Minimal Height, Maximum Performance

With a total height of 124.6mm, the CRYORIG M9i/M9a is the smallest CRYORIG Tower cooler. Featuring the same materials and cooling technology found on all CRYORIG tower coolers, there are no compromises or downgrades to quality and performance. It’s the perfect entry product to PC Building, Enthusiast Grade Cooling, and Overclocking.

Zero Interference

Any RAM

Any Height

Focusing on providing the widest range of compatibility, the M9i/M9a’s small size moves the heatsink away from the RAM and inside the *CPU Keep Out Zone, offering optimal compatibility for RAM with tall heat spreaders on both intel™ 115X and AMD platforms.

The CPU Keep Out Zone is a design guideline set by both intel™ and AMD. It is set around the CPU, and dictates no components over a certain height can be placed there.

33% Cooler Than Stock

With Tower Cooling Technology

With the help of CRYORIG proprietary cooling technology and a more efficient heat pipe-based tower design, the CRYORIG M9i/M9a outperforms stock cooling options while using less RPM and generating less noise.

Heatsink Specification

Dimension ( with fan ) L87 mm x W102 mm x H124.6 mm

Weight ( with fan ) 425 g

Weight ( without fan ) 345 g

Heat pipes 6mm heatpipe x 3 units

Fin T = 0.4 mm ; Gap = 1.6 mm

Fin Pcs 40 pcs

Copper Base C1100 Pure copper nickel plated

RAM Height Limit Limitless

TDP 120 W

Fan Specification

Dimension L92 mm x W92 mm x H25.4 mm

Weight 80 g

Rated Speed 600 ~ 2200 RPM ±10 %

Noise Level 26.4 dBA

Air Flow 48.4 CFM

Air Pressure 3.1 mmH2O

Ampere 0.11 A

Motherboard Compatibility

M9i

1150, 1151, 1155, 1156